When it comes to workplace safety, few threats are as dangerous—or as sudden—as electrical shock. For professionals working in environments where contact with electricity is a possibility, the right footwear can literally save your life. That’s where EH Rated Safety Boots come in.
If you’ve seen “EH” on a pair of work boots and wondered what it meant, this article is for you. We'll break down what the EH rating means, who needs EH-rated footwear, and why it’s essential to choose boots that are CSA approved, ASTM certified, and puncture-resistant, like those from MOOSELOG.com.
What Does “EH Rated” Mean?
“EH” stands for Electrical Hazard. EH-rated boots are designed to protect the wearer from electrical shock when accidental contact is made with live electrical circuits or energized equipment.
According to the ASTM F2413-18 standard, EH-rated safety boots must be able to withstand 18,000 volts of electricity at 60 Hz for one minute without letting the current pass through to the foot under dry conditions.
This protection is secondary—meaning it’s not for direct contact with high-voltage machinery but rather a safeguard in the event of unexpected exposure, such as stepping on a live wire or touching energized equipment.
Why EH Rated Boots Are Important
Electrical injuries can happen in a split second. A shock can cause burns, nerve damage, or even be fatal. EH rated boots provide an essential level of insulation between your feet and the ground, helping to reduce the risk of injury in case of accidental electrical contact.
But electrical hazards are rarely isolated. That’s why many EH-rated boots, especially those offered by MOOSELOG, also feature puncture-resistant soles to protect from sharp objects like nails, screws, and glass that often litter job sites.
This combination of shock resistance and puncture protection makes EH-rated safety boots one of the smartest PPE choices you can make.
Industries Where EH Rated Safety Boots Are a Must
If you're working in or around any environment with electrical systems, EH-rated footwear should be considered a requirement, not an option. These industries include:
- Electrical Contracting
- Construction
- Utility Maintenance
- Telecommunications
- HVAC
- Manufacturing
- Facility Operations
- Oil & Gas
Even if you're not an electrician, jobs that require frequent use of power tools, ladders, or lifts near electrical sources benefit greatly from EH protection.
What to Look for in EH Rated Boots
Not all EH-rated boots are created equal. When evaluating options, make sure they meet these essential criteria:
✅ CSA Approved and ASTM Certified
Certification is non-negotiable. Look for EH-rated boots that meet CSA Z195-14 (Canada) and ASTM F2413-18 (USA) standards. These standards confirm the boots have been rigorously tested for electrical hazard resistance.
✅ Puncture-Resistant Protection
EH-rated boots that also include puncture-resistant midsoles provide additional safety from below—an often-overlooked hazard in construction and industrial work.
✅ Durability and Comfort
While safety is the top priority, daily wear requires boots that won’t weigh you down. MOOSELOG EH-rated safety boots are crafted with lightweight construction and reinforced durability, keeping your feet protected without fatigue.
How Long Do EH Rated Boots Last?
Like any safety equipment, EH-rated boots don’t last forever. Over time, wear and tear can reduce their ability to insulate you from electrical current. Here are signs it’s time to replace your boots:
- Cracked or split outsoles
- Excessive tread wear
- Worn-down puncture plates
- Damage to the upper boot or seams
Routine inspections are crucial. If you’re unsure about the condition of your EH-rated boots, it’s better to replace them than risk an incident.
Why Choose EH Rated Boots from MOOSELOG?
At MOOSELOG.com, we focus on safety boots that meet the highest standards without compromising on performance. Our EH-rated styles are:
- ✔ CSA Approved
- ✔ ASTM Certified
- ✔ Puncture Resistant
- ✔ Lightweight and Job-Tested
Our designs are built for real tradespeople—those who climb, lift, repair, and build every day. MOOSELOG boots are made to support your every step with the protection you need in environments where electrical risks are real.
Final Thoughts: Safety You Can Stand On
Electrical hazards don’t wait for you to be ready. They appear without warning and often when least expected. That’s why wearing EH Rated Safety Boots is one of the simplest yet most effective safety decisions you can make.
From job sites to power plants, MOOSELOG’s EH-rated, CSA-approved, ASTM-certified, and puncture-resistant boots deliver the protection and confidence you need to get the job done—safely.
Your protection starts from the ground up. Make it count with MOOSELOG.
